Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
US
REPLACEMENT PARTS & ACCESSORIES
None of the original components of the helmet may be changed
and/or removed without the manufacturer's approval. The
helmet should not be modifi ed to attach any accessories except
for winter padding and sun visor.
Check with the dealer or manufacturer whether these accessories
are available.
If they are supplied with the helmet, follow the mounting
instructions that come with the accessory. Only accessories
approved by the manufacturer should be used.
CLEANING, STORAGE & TRANSPORTATION
Clean the helmet (and sun visor, if applicable) only with water,
neutral pH soap, and a soft, clean cloth, allowing it to air dry at
room temperature.
The inner lining should be washed by hand in cold water. If
it is removable, it can be washed by hand in cold water or in
the washing machine (maximum allowed water temperature is
30°C - 85°F).
In no case should chemical detergents or solvents be used.
Petroleum-based solvents are especially dangerous.
They can damage a helmet so that its protective qualities are
signifi cantly impaired.
When not in use, the helmet should be stored away from direct
sunlight and sources of heat, and we recommend putting it
back in the original package.
Given the type of device (helmet), no particular instructions are
necessary for its transportation.
WARNING! DO NOT use the helmet if it has been exposed to
high temperatures and/or damaged by heat.
Publicidad
Tabla de contenido
