Alarm Functions - ASCOM i75 Guía De Referencia Rápida

• Dial a number from the local phonebook.
See heading; Use the local phonebook
• Dial a number included in a message.
See heading; Dial a number included in a message.
• Dial a number from the central phonebook.
See heading; Search in the central phonebook.
Answer/End a call
When the ring signal sounds, press
key to answer. To end the call, press
shown in the display.
Reject a call
When the ring signal sounds, press
key to reject the call. Call information will be stored in the
"Call list".
Turn loudspeaking function on/off
During a call, press the middle Soft key to turn the loudspea-
king function on/off.
Turn audio signals on/off
In stand-by mode, a long press on the Mute button switches
audible signals on/off. The "Audio signals off" icon indicates
a completely silenced handset.
A short press on the Mute button before answering a call
silences the ring signal.
Mute the microphone during a call
A press on the Mute button during a call switches the micro-
phone on/off. The text "Muted" is shown in the display when
the microphone is off.
Change the volume during a call
Press the Volume button upwards to increase the volume,
downwards to decrease the volume.
Lock/Unlock the keypad manually
Press the *-key and then press "Lock" or "Unlock" to lock/
unlock the handset.
Charge the battery
Charging the battery is done in a desktop charger or in a wall
mounted charging rack. A filled "Battery" icon indicates a
fully charged battery. While in a desktop charger, the handset
is fully operational.
Note: Do not charge in a temperature below +5°C.
6
or the "Accept" Soft
. The total call time is
or the "Decline" Soft
Messages
Receive a message
When a text message is received, the LED starts flashing
accompanied with a ring signal and/or vibrating. If the mes-
sage is received during a call, the user is notified by a beep.
Read/Delete a stored message
To read, open the message list either from the menu, or by
pressing the Navigation key
list and press "Open".
To delete, open the message and press "Delete"; the question
"Delete message?" is shown. Press "Yes".
Dial a number included in a message
Open the message and press
message. If the message contains a scrollable list, select an
item and press .
Send message
From the menu, select "Messages". Mark and select "Send
Message". Enter the number and press "OK". Enter the mes-
sage and press "Send".

Alarm functions

Personal alarm*
Press the red Alarm button twice within 2 seconds. "Personal
alarm" is displayed.
Test alarm*
Press and hold the red Alarm button until "Test alarm" is
displayed.
* The alarm text is configurable and can differ from default.
Activate/Deactivate alarms
From the menu, select "Settings". Mark and select "Alarm
settings". Select "No-movement" or "Man-down" and press
"Change"; the checkbox is selected/cleared.
Hot keys/Soft keys can also be reserved for activation/deacti-
vation of alarms.
. Select the message from the
to dial the first number in the
GB
7