Components Of The Baby Monitor - CANGAROO MOMMY'S SENSE Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
EN
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! THESE INSTRUCTIONS CONTAIN IMPORTANT
INFORMATION, GUIDELINES AND RECOMMENDATIONS FOR THE PRODUCT AND ITS SAFE USAGE.
Using the Cangaroo baby monitor, you can hear your baby from every room in your home and around it.

COMPONENTS OF THE BABY MONITOR

1.A. Baby unit (Sender): 1. Soft Antenna; 2. Hanging Hook; 3. Power Indicator; 4. Mic; 5. Battery
Compartment; 6. Power/Sensitivity Control; 7. Channel Switch; 8. DC Jack
B. Receiver: 1. Soft Antenna; 2. Hanging Hook3. Power Indicator; 4. Speaker; 5. Battery Compartment; 6.
Power/Volume Control; 7. Channel Switch; 8. Belt Clip; 9. DC Jack
AC ADAPTOR
Producer: Dong Guan Reyi Power Electronics Co., Ltd
Model: RY055050EU
Input: 100 -240V; ~ 50/60 Hz, 0.2A
Output: 5.5V, 500mA
The AC Adaptor is low voltage power source that allows you to use your household electricity to run the Baby
Monitor. Connect the AC Adaptor to the AC Adaptor Jack in the Parents or Baby Unit.
Both plug into any standard volt electrical outlet in your home. It is recommended to turn off the units before
plugging in or unplugging the adaptors.
CAUTION: These adaptors were made with a specific design for this product. They cannot be used with any
other appliance. Never use a different type of adaptor with this Baby Monitor, which is not supplied by the
manufacturer/ importer.
GUIDELINES AND RECOMMENDATIONS FOR SAFE USE OF THE PRODUCT
1.WARNING! This product cannot substitute the responsible and proper adult supervision and should
not be used as a substitute.
2. When you place the baby unit in the nursery, you should take extra care to plug the adaptor in a
mains electric outlet as far away as possible from the baby.
3. This Baby Monitor is intended as an aid. Do not use it as a medical monitor or a substitute for
responsible and proper adult supervision.
4. Make sure the Baby Unit and adaptor are out of child's reach. Do not place the Baby Unit inside the
baby's crib or playpen!
5. The antennas on the Parents and Baby Units are fixed, do not try to extend them.
6. Do not attempt to modify the product, to repair it by yourself if it is damaged or to replace any of
its parts with ones that are not supplied by the producer/ importer.
7. The sender (baby unit) must be placed at least 1 meter away from the child in order to ensure that
the microphone can pick up the child's sound.
8. Unwrap and fully extend the power cord for best transmission if the adaptor is being used. Plug the
adaptor into the nearest standard household electrical outlet.
9. Do not immerse any of the baby monitor's parts in water or other fluid.
10. Before plugging the adaptor into a power outlet, check if the voltage indicated on the adaptor
corresponds to the local mains voltage.
11. Check the baby monitor and adaptor regularly before usage for damages or broken parts. If you
find such, do not try to repair the product by yourself. For this purpose, contact the shop from which
you've purchased the product or the importer.
12. Do not cut off the adapters to replace them with other plugs, as this causes a hazardous situation.
13. Do not use the baby monitor in wet environment or near water supplies.
14. Do not store the baby monitor or the charger near direct heat sources – such as open fireplaces,
heat appliances or cookers.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bm-163

Tabla de contenido