BGS technic 3323 Guia De Inicio Rapido página 5

INSTALLATION
1. Take out the unit and accessories from the box.
2. Choose a suitable place near source of compressed air.
3. Take the mounting bracket as a template to mark the position for dowels and drill four holes on
the wall (Fig.2)
4. Fix the bracket by four screws (Fig.1).
5. Connect the reel to the mounting bracket.
Note
1. The reel should be installed to a wall or post horizontally.
2. It is suggested to mount the reel approximately 1 meter above the ground.
OPERATION
Connect the hose to the compressed air system.
UNWIND
1. Pull out hose to desired length and stop after "KAKA" sound is heard
ROLL UP THE HOSE
1. With the end of the hose, go back to the Hose Box.
2. Turn off compressed air, to seperate hose connection from
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Fig.1
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
70
164
Fig.2
Fig.3
compressor.
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed