Publicidad
Idiomas disponibles
Idiomas disponibles
How it works
2
Charging
control light
The induction loop fastener makes it easy to put on the device and minimizes the
risk of accidents.
The ON/OFF switch on the back panel of the receiver is used to switch the receiver
on and off. Important: Always make sure to switch the receiver off when you've
finished using it. Otherwise, the battery will run down.
Induction loop fastener
3.5 mm stereo jack
Dummy
Standby
indicator
When you first charge the battery
packs for the headset receiver let
them charge for at least 6 hours.
Only use original battery packs.
The package includes two battery
packs and one dummy. You will re-
cognize the dummy because it has
no metal contact surfaces.
Standby indicator:
The blue LED indicates that the de-
vice has established a connection
with the audio source and is on Send.
Charging control light:
Red LED =
Battery is in the battery
recharger and in the
process
recharged
Green LED = Battery is fully rechar-
ged
of
being
English 13
Publicidad
