Pack Contents - Polar GG762 Manual De Instrucciones

Refrigerador para vinos
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
UK
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your POLAR product.

Pack Contents

The following is included:
Wine fridge
Door Handle assembly
POLAR prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your POLAR dealer immediately.
Installation
Note: If the unit has not been stored or moved in an upright position, let it stand
upright for approximately 12 hours before operation. If in doubt allow to stand.
1. Place the fridge on a floor that is able to support it once fully loaded.
2. Remove the appliance from the packaging and the protective film from all surfaces.
3. Avoid positioning the fridge in direct sunlight or damp areas.
4. To optimize performance and longevity, ensure a minimum clearance of 2.5cm is maintained between
the unit and walls and other objects, with a minimum 5cm clearance on the top. NEVER LOCATE
NEXT TO A HEAT SOURCE.
5. If necessary, adjust the screw legs of the fridge to make it level.
WARNING: When positioning the appliance, ensure the supply cord is not
trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance.
6. Installing the Door handle: Remove the door gasket covering the handle location - there are
two designated holes for the handle installation. Attach the handle and fix with the screws provided.
Replace the door gasket into place.
Operation
Note: the fridge should be placed in an area where the ambient temperature is between
16-38°C.
When using the fridge for the first time, or re-starting it after a long period of time, there may be a
few degrees variance between the selected temperature and what is shown on the LED display. Once
the fridge has been switched on for a few hours, this should rectify itself.
If the unit is unplugged, has lost power or been turned off, wait 30 minutes to 2 hours before
restarting the appliance.
4
GG762-GG763-GG764_ML_A5_v1_202105019.indb 4
GG762-GG763-GG764_ML_A5_v1_202105019.indb 4
Instruction manual
2021/5/19 14:41
2021/5/19 14:41

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gg763Gg764

Tabla de contenido