Setting The Room Code; Turning The Touch Pad On Or Off - Bose WAVE RADIO III Guia Del Usuario

Setting the room code

radio III comes from the factory ready to
®
Your Wave
operate as a second room (room code B) when
®
connected to a Bose link enabled Lifestyle
you want to use your Wave
system beyond a second room you will need to change
the room code to match that of the remote control you
are using for that room.
Refer to your Lifestyle ® system owner's guide for more
information on room codes.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
ROOM- B
The dashes following the room letter
indicate how the microswitches should
be set on the Lifestyle
control.
3. Press Time – or Time + to select a
room code other than room B.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
®
system. If
radio III with your Lifestyle
®
>
six times until
is displayed.
® remote
Turning the touch pad
on or off
If you do not wish to use the touch pad feature you can
turn it off.
®
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
2. Press Tune/Playlist
until TOUCH PAD- is displayed.
3. Press Time – or Time + to select
OFF or ON.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
P Y W
ERSONALIZING OUR
>
seven times
® R III
AVE ADIO
English – 17