Technical Data; Intended Use; Safety Notes - Bosch Rexroth SM24V+ Guia De Inicio Rapido

3 609 929 A21/06.02 | SM24V+

1 Technical Data

1 Technical Data
Designation
Order number
Admissible ambient temperature
Admissible relative humidity when in operation
Admissible storage temperature
Admissible relative storage humidity
System of protection
Dimensions (B x H x T)
Weight
Table 1:
Subject to alteration
2

Intended Use

The SM24V+ interface module is intended to
be installed in the SE3x2/SEH3x2 control
unit or the KE3xx communication unit. The
module enables the tightening system to be
controlled via a 24 V interface or for a
24 V status signal to be produced from the
tightening system. In addition, actuators and
sensors can be connected to this interface.
Several modules can be used in one tighten-
ing system. The corresponding function is se-
lected in the operating program.
The module has 10 inputs and 13 outputs
available. The outputs are short circuit-proof
and protected against polarity reversals.
SM24V+ conforms to DIN 19240.
Bosch Rexroth AG
SM24V+
0 608 830 250
0 up to 55 °C with ventilator
20 - 90 % non-condensing
–20 °C up to 70 °C
20 - 95 %
IP 20 (~NEMA 1) when installed
24 mm x 81 mm x 219 mm
0.05 kg
3

Safety Notes

The data specified above only serve to de-
scribe the product. No statements concern-
ing a certain condition or suitability for a
certain application can be derived from our
information. The information given does not
release the user from the obligation of own
judgment and verification. It must be remem-
bered that our products are subject to a nat-
ural process of wear and aging.
Keep this technical information in a place
easily accessible for all users.
The technical information is intended for spe-
cially trained personnel who have a special-
ized knowledge of the machine's hardware
components.
Repairs or other operations on the
hardware or software of our prod-
ucts, which are not described in
these instructions, may only be
carried out by Rexroth experts.
9/36