Flamingo 519574 Manual Del Usuario página 4

Unfolding the stroller:
1. Release locking latch
2. Unfold the buggy as shown.
Make sure both locks snap into place.
Assemble front wheels:
3. Push wheel onto buggy leg until it snaps
into place. Repeat for the other wheel. Tug
rmly on each wheel to be sure wheels are
securely in place.
Assemble rear wheels:
4. Assemble rear wheel-holders. Slide wheel
onto axle. Slide washer onto axle.
Put on retainer cap.
5. Plug the rear leg tubes into the wheel
holders
Operate brakes:
6. Push levers on both rear wheels down to
lock. Pull levers up to unlock.
Open the canopy:
7. Open and fold the canopy as in picture 7.
Fold and unfold buggy:
8. Unzip and pull back the canopy.
9. Standing behind the stroller, pull up on both
side latches.
10. Engage locking latch.
1.
3.
4.
5.
7.
9. + 10.
2.
6.
8.