Beckett WFK12 Manual De Instrucciones página 2

HELPFUL SITE PLANNING HINTS
Waterfalls generally face the viewing area.
When building your Waterfall, keep in mind you will
need room for easy access to the Waterfall for
maintenance.
STEP 1:
Apply Teflon Tape to the Weir's
Adapter.
STEP 2:
Connect the Adapter to the Weir, as
shown.
STEP 3:
Attach the Tubing to the Adapter.
STEP 4
: Connect the Pump's Adapter to the
Pump, as shown.
STEP 5:
Attach the other end of the Tubing to
the Pump's Adapter.
STEP 6:
Attach the LED Light to the Weir, and
confirm the light shines out toward water fall，set
the LED Light wire to the edge of the Weir by the
Plastic Clip, as shown.
LED Light
Front
( Towards
water fall )
Plastic Clip
Transformer
Back
Primary
Viewing
Area
Adapter
Waterfall Weir
Weir
Teflon Tape
Corrugated
Tubing
Adapter
Pump