Firmware Upgrade - Naxa NMV-151 Manual De Instrucciones

13. Firmware upgrade

This player provides with firmware upgrading tool to upgrade or repair the
firmware in the player.
1. Down load the latest firmware.
2. Connect the player to PC's USB port correctly; make sure no other movable
disks are connected to the PC at the same time.
3. Run this tool.
If the firmware in the player is in good condition, the tool will shift to firmware
upgrading mode; it displays the information of the player's firmware such as
version etc in the box on the upper left corner of the tool interface. Click
button "Select new version firmware file" to select the firmware file to be
upgraded. After the firmware file detected to be correct by the tool, it displays
the information of the selected firmware such as version etc in the box on the
upper right corner of the tool interface. Now click button "Start upgrading" to
upgrade the firmware. If the internal firmware of the player has been
damaged, the tool will change to firmware restoration mode. The version
information of the player's internal firmware now will not be displayed in the
box on the upper left corner of the software interface. It requires the user to
select a correct firmware file to repair the damaged one. At the same time, the
information such version etc of the firmware file to be repaired is displayed in
the box on the upper right corner of the interface; click button "Start
upgrading" to upgrade the firmware.
Do not disconnect the player from the PC during firmware upgrading or
4.
repairing. After the upgrading is completed, a prompt "firmware upgrading
succeeded, the program will exit automatically!" pops out. Now confirm,
the tool will shut down and reset the player, the whole upgrading is
completed.
14. Others
14.1 Troubleshooting
The player does not work or
the LCD displays nothing.
• Check battery power.
• Check Off setting
29