Beta 1368 Instrucciones página 9

INSTRUCTIONS FOR USE
Check that the electrodes have cooled down before fitting the staple into the gun electrode.
• After completing the operation, cut the projecting parts of the staples. Grind and finish.
• Finally, use the ON/OFF switch to turn the staple welder off, making sure that the gun electrodes have cooled to
room temperature.
Replace the staple welder in a dry, non-humid area. Use a dry cloth to clean the outer body.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre through your Beta dealer.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of product for professional use only, contact the manufacturer which will arrange for the product to be
properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment
and human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
WARRANTY
This device is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty
will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
EN
9