Setting up your French Door Refrigerator
4. Connect the water line (
clip on the coupler with pulling tube.
Connect the one connector(
door and two connectors (
of the top cap.
The clip is enveloped inside of the top cap.
5
Dispenser
Door Tube
The water line (
CAUTION
water leakage from the dispenser.
Be sure to sensor (yellow cable) is inside the top table.
5. Position the Top Table(
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert
the Top Table cap(
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
14_Setting Up
) and then insert a
5
) on left side
4
) at each side
3
Cabinet
Tube
) must be fully inserted to the marked line to prevent
5
) in place.
2
) and close the doors.
3
4
Red Clip
(1/4")
3
2