Publicidad
MANUAL DE INSTALACIÓN Y MANTENIMIENTO
SERIE KBZ
Thanks for choosing our product. Please read the manual carefully before operation.
1. PRODUCT SPECIFICATIONS
1) The body of motor and pump is made of rigid cast iron for long-lasting durability.
2) Greatlyincreased maximum submersion depth due to double mechanical seal resistant to high
pressure (0.5 Mpa).
3) Effective motor cooling due to discharge channel cast as part of the motor housing. Space eco-
nomy by a top outlet.
4) Discharge 50 mm (2") to 150 mm (6"), motor 1,5 kw (2Hp) to 11 kw (15 Hp).
5) Hermetically sealed motor equipped build.in thermal protection.
6) Motor is dry type submersible induction motor ( 2 poles )
2. OPERATION CONDITIONS
1) The supply voltage should be within ± 5 % os the rated voltage.
2) To use the pump, the water temperature should be between 0ºC and 40ºC.
3) The pump should be used to pump fluids such as oil, salt water, or organic solvents.
4) The pump must never be used to pump explosive liquids and should not be operated in an area
from whom explosive elements might be present.
5) The pump must not be used in a partially disassembled state.
6) Maximum submerion depth: 50 m.
3. PRIOR TO USE
Check the following points after receiving the pump.
1) Check the pump for damage that may have occurred during shipment.
2) Inspect the pump for any cracks, dents, damaged threads, etc.
3) Check power cord ( and seal minder cord, if installed) for any cutss or damage.
4) Check for, and tighten any hardware that appears loose.
5) Carefully read all tags, decals and markings on the pump.
6) Important: Always verify that the pump nameplate, amps, voltage, phase, and HP ratings match
ypur control panel and power supply.
7) Using a megger tester, measure the resistance between each of the core wires and the ground
wire (green) to verufy the insulation resistance of the motor.
Insulation resistance reference value=20MΩmin
Warranty dpes not cover damage caused by connecting pumps and controls to an incorrect power
source (voltage/ phase supply). Record the model numbers and serial numbers from the pumps
and control panel on the front of this instruction manual for future reference. Give it to the owner or
affix it to the control panel when finished with the installation.
16
www.proindecsa.com / proindecsa@proindecsa.com
Publicidad
Solución de problemas
