Transporting - Hoover Nano-Lite Manual Del Propietário

2-2
ON-OFF switch
Plug cord into electrical outlet.
To turn cleaner ON (I), push ON/OFF
switch once.
To turn cleaner OFF (O), push
switch again.
2-5
Retractable handle
The handle is designed to retract
into the body of the cleaner for con-
venience in storing or carrying. To
lower handle: depress button (B) at
handle base and push handle down.
To raise handle: depress button (B)
and pull handle up until it locks into
desired position.
2-8
Handle positions
The handle of your cleaner has
three positions; upright for storage
and when using cleaning tools;
operating position for general
operation on carpet and floors; low
for reaching under low furniture.
Step on hood to lower handle.
6
2-3
A
The cleaner is shipped with the agi-
tator brush roll in the BARE FLOOR
position. To turn the agitator brush
roll on for CARPET, step on the
pedal (A).
2-6
B
Transporting cleaner
To move your cleaner from room to
room, put handle in upright position,
tilt cleaner back on rear wheels and
push forward.
2-9
C
Floating nozzle
carpet height adjust-
ment
The cleaning of carpet and rugs
takes place at the nozzle (C).
The nozzle "floats" for adjustment to
various carpet heights and hard sur-
face floors.
2-4
Handle positions
The handle has two positions:
upright and operating.
To lower handle to operating posi-
tion, place your foot firmly on the
cleaner hood and pull handle back.
2-7
Carrying cleaner
The cleaner can also be moved by
using the carrying handle.
2-10
A
Agitator brush roll
on-off
To shut the agitator brush roll off for
cleaning hard floors, step on the
pedal (A). To turn the agitator brush
roll on for carpet cleaning, step on
the pedal again.