Cleaning And Maintenance; Environmental Protection - Eldom ina HS8 Manual Del Usuario

GENERAL DESCRIPTION
1. ON/OFF switch
2. Control lamp
3. Handle
4. Rest
5. Power cord
TECHNICAL DATA
- power: 25W
- supply voltage: 230V ~50Hz
OPERATION
The appliance is designed for hair styling. The curler should be used for slightly wet or
dry hair. Place the appliance on a flat surface so that it lies on the rest (4) and plug it in.
Turn the curler on by pressing the ON/OFF switch (1). If the appliance is in operation,
the control lamp (2) is on. Wait for about 5 minutes until the curler heats up to the
appropriate temperature. Press the handle (3) to release the curler clamp and start hair
styling. Do not keep hair in the appliance for more than 20 seconds at one time. Avoid
touching with the fingers the heated elements of the curler when the appliance is on.
After use, turn the appliance off by pressing the ON/OFF switch (1) and remove the
power cord from the socket. Put the curler on the rest and wait until it cools down.

CLEANING AND MAINTENANCE

- before cleaning, disconnect the appliance from the mains,
- clean the appliance only if it is cold,
- do not immerse in water,
- the external surfaces can be cleaned with a damp cloth
- do not use heavy-duty or surface-damaging detergents and cleaning products

ENVIRONMENTAL PROTECTION

- the appliance is made of materials which can be recovered or recycled
- the appliance should be handed over to the appropriate centre of collection and
recycling of electrical and electronic equipment
WARRANTY
INSTRUCTION MANUAL
HAIR CURLER HS8
4
EN
3
2
1
5
EN|9