Courtyard Creations TGS27SH Instrucciones Para El Montaje

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
PARTS LIST
PART
MATERIAL CODE
NO.
1
TGS27SH-CS01
2
TGS27SH-CS02
3
62TGS27SHY101
4
17C17A0403001Y4
You will need the following tools:
-Phillips Screwdriver (Not included)
-Hex.Key Wrench (See Part #8)
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing upwards. Insert the legs (#2) into the plastic
holders attached on the underside of the table top
(#1) rim. See Figure 1.
! Use the correct bolts as indicated. Do not tighten any of the bolts until the table is
completely assembled.
Do not sit or stand on this table.
!
Do not discard of any of the packaging until you have checked that you have all of the
!
parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
!
by children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
!
!
Quote the following FQC NO. when contacting the service center.
V-4
INTENDED FOR RESIDENTIAL USE ONLY.
TGS27SH
PART Q'TY
TABLE TOP
LEG
CENTER CONNECTOR
SCREW ST4.2*12
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
DO NOT RETURN TO THE STORE!
STOP
PAGE 1 OF 2
PART
MATERIAL CODE
NO.
1 5
17C01A0706002Y4
4 6 17FA05040301-Y4
1 7
18000337002
8
4 17KAA0201----Y4
FIGURE 1
2
PART
BOLT M6*16
WASHER d6.5*D13*1.0
BOLT CAP M6
HEX.KEY WRENCH 6MM
2
2
2
1
COURTYARD CREATIONS INC.
Q'TY
8
8
8
1