DJI Snail 430-R Racing ESC Guia Del Usuario página 10

Ensure that there are no open circuits or short
circuits when soldering the ESC cables.
ESC Configuration
Calibrate the throttle range and switch the motor
rotation direction using the remote controller.
1. Power on the remote controller and receiver. Ensure
a strong link between them. Push the throttle stick
all the way up. The motor will start a double beep, a
single beep sequence.
2. Then the warning sound will alternate between a
quick single beep and a quick double beep. Pull
the throttle stick all the way down after hearing a
single beep to calibrate the throttle. Pull the throttle
stick all the way down after hearing a double beep
to reverse the motor rotation direction. By rotating
the desired motor quickly in any direction, this
motor's rotation direction will be changed.
3. The warning sound becomes a chime when
completed.
4. Restart the ESC after reversing its rotation direction.
8