Pairing The Headset With Bluetooth Transmitter - Zipy GO EarAir Guía De Usuario

"EARAIR" from the list of devices shown;
4) According to the indication, enter password or PIN No: "0000";
5) If prompted by your mobile phone to connect, select "Yes" (this will vary
among mobile phone models);
6) After successful connecting, blue LED of the headset quickly blinks
twice or three times every 4 seconds.
Notes:
If the pairing is not successful, please switch off headset firstly, and then
re-pair according to the steps 1-6 mentioned above.
After pairing is successful, the headset and the mobile phone will
remember each other, they will no need to re-pair next time.
The headset can remember 8 paired devices, when the number of paired
devices exceeds 8, the first one will be replaced.
If you want to pair the headset with other devices, please pair it with the
new device according to steps 1～6 mentioned above.

Pairing the headset with Bluetooth transmitter

You can connect the headset to a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not
included) for example. The pairing steps are as follows:
1) Keep the Bluetooth transmitter and the headset within 1 meter when
pairing;
2) Make the headset enter pairing mode (refer to "How to enter pairing
mode);
3) Switch on the Bluetooth transmitter, it will search Bluetooth device
automatically and start pairing;
4) When the headset requests PIN No, the Bluetooth transmitter will
respond "0000" automatically;
5) After successful pairing and connecting, blue LED of the headset blinks
twice every 4 seconds.
Notes:
The pairing password of the headset is "0000". So, the headset can only
pair with a Bluetooth transmitter whose pairing password is "0000".
If pairing still fails after several tries, please refer to the Bluetooth
transmitter's user's manual for further information.
Multi-pair
6