Before Use; Operation - cecotec JUICE&LIVE 1500 PRO Manual De Instrucciones

ENGLISH
8. Pulp container
9. Jug for juice

3. BEFORE USE

Fig. 2
1. Fit the bowl in the plastic flaps at the base of the product and turn it clockwise to fix it.
Fig. 3
2. Insert the filter in the centre of the bowl and make sure it fits into place.
Fig. 4
3.1. Fit the filter in the bowl. To do so, make sure that the pulp outlet in the filter matches the
pulp outlet in the bowl, where the silicone base of the bowl is.
Fig. 5
3.2. Make sure the marks in the bowl and in the filter match.
Fig. 6
4. Once the filter is properly fixed (you should not be able to turn it), fit the screw in the axis at
the centre of the bowl base of the product.
Fig. 7
5. Fit the inlet mouth in the bowl. In order to do so, align the OPEN signal of the mouth piece
and the signal in the bowl.
Fig. 8
6.1 Turn the inlet mouth clockwise, aligning the CLOSED mark with the mark on the bowl.
Fig. 9
6.2 Make sure that the flap in the mouth piece fits the upper part of the main body of the
product. The device is now ready to use.

4. OPERATION

1. Plug in the unit, and place containers under both the juice and the pulp outlet.
Fig. 10
2. "Play" starts the appliance, "Reverse" is to be used only when food is stuck in the appliance,
and "Stop" stops motor and turns off the unit.
14
JUICE&LIVE 1500 PRO