Scosche MAGICMOUNT MQ2CD Manual Del Usuario página 5

REMOVING THE METAL PLATES
Use a thin plastic card to carefully lift the plate's adhesive
surface from the mounting surface. Slowly lift up and
remove the plate. Do not use any heat or liquids to
remove the plate, due to risk of damaging your phone.
Contact Scosche Customer Service for any additional
assistance at 800.363.4490 Ext. 1 or
customerservice@scosche.com.
MAGICMOUNT'" CHARGE
RECOMMENDATIONS
FOR OPTIMAL USAGE
It is possible for the transmitter to
interfere with some wireless systems
within a car. Specifically, key fobs
with immobilizers, keyless start
systems or tire pressure monitors.
Most interference issues will be
minimized by considering the
following suggestions whenever
possible. Contact Scosche customer
service for further assistance
at 800.363.4490 Ext. 1 or
customerservlce@scosche.com.
• Insert the key fob into the docking
slot whenever possible while operating the transmitter.
• Connect the transmitter to a 12 volt accessory port that is
powered only while the vehicle's ignition is in the "ACC" or
"ON" position.
• Place phone on transmitter after vehicle is started.
r
cyi/ �
�
V