Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
NOTE: Do not completely tighten the SCREWS in this step.
å
Fasten the BOTTOM (C) and BRACES (E) to one of
å
the ENDS (B). Tighten four BLACK 1-3/16" HEX HEAD
SCREWS (4) using the L-WRENCH (3).
Fasten the remaining END (B) to the BOTTOM (C) and
å
BRACES (E). Tighten four BLACK 1-3/16" HEX HEAD
SCREWS (4) using the L-WRENCH (3).
B
Page 4
E
C
E
The tabs
must be here.
BLACK 1-3/16" HEX HEAD SCREW
(8 used in this step)
These holes
must be here.
E
E
C
4
3
B
Publicidad
