ESPAÑOL
Si en alguna ocasión detecta una incidencia con el producto o tiene alguna consulta, póngase
en contacto con el Servicio de Asistencia Técnica oficial de Cecotec a través del número de
teléfono +34 96 321 07 28.
26
GRANDCOOLER 20000 SILENTCOMPRESS BLACK/WHITE/STEEL
1. PARTS AND COMPONENTS
Fig. 0.
1.
Fridge
2.
Door
Accessories
Always slide one of shelves into the guides and keep it in this position. To do this, pull the
storage shelf forward until it can be swiveled upwards or downwards and removed.
2. BEFORE USE
Take the product out of the box and remove all packaging materials.
Make sure the product is in good conditions. If any visible signs of damage are observed,
contact the Technical Support Service of Cecotec immediately.
Before connecting the appliance to the power source, let it stand upright for approximately
2 hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth and a weak solution of
bicarbonate soda. Then, rinse with warm water and wipe off excess water with paper towel.
Clean the shelves and drawer.
Place your appliance on a surface that is strong enough to support the appliance when it is
fully loaded.
Before placing any food in the unit, turn it on and wait for 24 hours to make sure it is working
properly and to allow it time to fall to the correct temperature. The unit should not be overfilled.
3. INSTALLATION
Place the device on a flat, stable surface. The device must be installed in a well-ventilated
room, and temperature must be within 16 ºC and 38 ºC.
When installing the device, make sure to keep a free distance of:
40 cm to each side
15 cm from the back
20 cm from the top
The door can be opened toward the right or left. Choose the side you want to open the door and
allows enough clearance as to open it completely.
The unit's door must be able to open fully as shown. W×D≥900 mm×800 mm
Fig. 2.
GRANDCOOLER 20000 SILENTCOMPRESS BLACK/WHITE/STEEL
ENGLISH
27