GUIRNALDA E27
CODE
392075
446433
446440
392082
392099
IP44
230V
30cm
15m
33cm
50m
WARNING
BEFORE STARTING THE INSTALLATION OF THIS PRO-
DUCT , PLEASE READ ATTENTIVELY THE INSTRUCTIONS
AND KEEP THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE PERFORMED BY QUA-
LIFIED PERSONNEL.
THE IMPROPER HANDLING OF THE COMPONENTS
OR THE PRODUCT COULD DAMMAGE THE CORRECT
FUNCTIONING OF THIS DEVICE THUS CANCELLING
THE WARRANTY OF THE PRODUCER.
THE WARRANTY OF THE PRODUCER IS CANCELLED IF
THE INSTALLATION IS NOT PERFORMED FOLLOWING
THE INDICATED IN REBT 2002.
THE APPLICATION ITC BT09-4 OF THE REBT (STAN-
DARD OF SPAIN) IS MANDATORY (INSTALLATION OF
OVERVOLTAGE PROTECTORS OF IN LINES AND RE-
CEIVERS) FOR INDUSTRY INSTALLATIONS AND PUBLIC
LIGHTING. THE WARRANTY DOES NOT COVER DAM-
MAGES PRODUCED BY OVERVOLTAGE ON RECEI-
VERS WITHOUT OVERVOLTAGE PROTECTORS.
THE APPLICATION OF ITC BT19 (INTERIOR OR RECEI-
VING INSTALLATIONS. GENERAL PRESCRIPTIONS) IS
MANDATORY.
THE APPLICATION OF ITC BT34 (INSTALLATIONS FOR
SPECIAL PURPOSES. FAIRS AND STANDS) IS MANDA-
TORY.
CONSUMPTION MAX. LAMPHOLDERS
20W
20W
20W
5W
2W
[GRÁFICOS: Unidades en mm/ GRAPHICS: Units in mm/GRAPHIQUES: Unités en mm/GRÁFICOS: Unidades em mm]
CABLE COLOR
Black
Black
Black
Black
Black
50cm
25m
33cm
100m
MAINTENANCE OF THE PRODUCT
ALL PRILUX CHRISTMAS LIGHTING MOTIF, NEED A
MAINTENANCE BEFORE BEING USED, IT MEANS TO
CHECK ALL THE CONNECTIONS (INCLUDED THE END
CAP) IN ORDER TO BE SURE THAT THE MATERIAL HAS
THE PERFECT TIGHTNESS.
WARNINGS AND PRECAUTIONS:
• If you use this product indoors, be aware that this product uses a 230V
power. a notice of discharge protection indoors necessary.
• This product is designed for decorative purposes.
• Keep out of reach of children and animals.
• This product can not be immersed in liquid or installed when it is raining.
• If the starter cable is connected to the outdoors, ensure that the external
earth or junction box is completely waterproof.
• If the product is damaged, discard the whole.
• LED bulbs can be replaced.
• Do not place this product near heat sources.
• This system is suitable for long-term outdoor use if you follow the instruc-
tions.
• Keep this information sheet for the future.
WARNING - BEFORE ATTEMPTING TO OPERATE
• Check that the product does not have any damage or defect before
connecting to the mains.
• Check that each cap has a waterproof rubber seal mounted securely. If
any board is missing, the product should not be used.
• I make sure the ring all the plugs, and the cap are in place.
• Check inside each cap to the copper terminals are both in the correct
position. One should be flat on the bottom and the other must be up (Fig.1).
• If you find a cap with the two terminals pointing up, one down curve to
match take next 'Only do this with unplugged garland !!
• Before installation, test all caps are functioning properly.
Nº LAMPHOLDERS
45
50
50
150
300
100cm
50m