Manhattan MLBX Guía De Instalación Rápida página 2

MLBX Wireless Laser Mobile Mini Mouse • Quick Install Guide
Thank you for purchasing the Manhattan® MLBX Wireless Laser Mobile Mini Mouse,
Model 177078. This guide presents the basic steps to set up and operate this device.
For detailed installation instructions and specifications, refer to the user manual at
manhattan-products.com.
Installation
1. Press the cover release and remove the battery compartment cover. Insert the two
included AAA batteries, then replace the cover.
2. If the LED flashes (indicating low power), power the mouse by connecting it to the
computer with the retractable USB cable.
3. Set the Power switch to On to place the mouse in Discovery mode.
4. Press the Connect button until the LED blinks slowly.
5. Open your computer' s Bluetooth utility (built into the operating system or third-party)
and scan for available Bluetooth devices.
6. When "Bluetooth Wireless Laser Mouse" displays, select it.
7. When prompted for a passkey, enter 0000. The operating system will detect the new
device and automatically install the driver(s), making the mouse ready for use.
Laser
Cover
release
Operation
• Before installing the mouse, ensure the Bluetooth utility has been installed.
• Press and release the Connect button on the underside of the mouse and confirm that
the LED lights.
• Make sure the mouse is within the effective operating range of 10 m.
• Press the DPI button to cycle through the 6 resolution settings: 500, 1000, 1500, 2000,
2500 and 3000 dpi.
• To save battery power, operate the mouse on a bright surface with a fine texture. A
very dark surface will result in higher power consumption.
• Avoid using the mouse on glass, mirrored or glossy surfaces, as it may work improperly
or not at all.
• For optimal transmission distance, don't use the mouse on a metal surfaces (as elements
such as iron and aluminum can interfere with its performance).
2
ENGLISH
Scroll wheel
LED
USB
port
Power
Connect
DPI
English
Cover