Technical Specifications; Tare Function - VOX electronics KW-1709 Manual Do Usuário

INSTRUCTIoN MANUAl
Thank you for choosing the electronic kitchen scale. Please read instruction manual carefully
before using the product for the first time. Please keep instructions in a safe place for reference.

TeCHNICAl SPeCIFICATIoNS

– Equipped with a high precision strain gauge sensor system
– Safety material (ABS or AS for foods)
– 180×180×4mmTempered safety glass
– Max capacity: 5000g
– Division: 2g
– Four unit convertible freely: g/kg/oz/lb:oz
–

Tare function

– Over-load /Low battery indicator
– Power: 1 x 3V CR2032 lithium battery (included)
– Dimensions of the scale: 180×180×18mm
oPeRATIoN
– Remove the insulation sheet from the battery contact before using.
– Place the scale on a firm, flat and even surface to ensure its accuracy. If using another bowl/
container to weigh, place the bowl/container on the middle of its glass platform.
– Press ''ON/TARE/OFF'' button(only one button on the right side of the scale) to turn on the
scale. The LCD screen will display "8888'', after about 3 seconds later, the LCD screen will
show zero reading status, then you can weigh anything you want.
– Place the object on the middle of the glass platform, if using another bowl/ container to
weigh, also place it on the middle of the glass platform.
– Wait till LCD weighing reading stabilized. The final stabilized reading shown on LCD will indi-
cate the actual weight of the object you are weighing.
TARe FUNCTIoN
– You can do consecutive weighing, without removing the weighing container which already
placed on the glass platform. Each time before adding additional object into the container,
simply press 'ON/TARE/OFF' button, the tare function will be operated and the LCD reading
will return to zero. Then place new additional object to the plate, the final stabilized LCD
reading indicates the net weight of the added object only.
– During tare function being activated, LCD will show with an icon "TARE" on the left bottom
side. After removed the original object from the plate, LCD will start to show negative value of
the object just removed.
UNIT CoNVeRT
YPress "ON/TARE/OFF" button to turn on the scale. The LCD screen will display "8888", then
continue to press the 'ON/TARE/OFF' button, g/kg/oz/lb:oz will be displayed on left of the screen
in turn.
After 3 seconds when you set the unit you want to use for weighing, the LCD screen will show
zero, you can weigh anything you want then.