Shure SBC800 Manual De Instrucciones página 10

1. Connect DC power cable to input jack on bottom of charger.
Finger tighten lock nut for a secure connection.
2. Route the cable along the desired channel and press into
place to secure.
3. Connect power cable to AC Adapter.
WARNING:
• Do not use pliers or any other tools to tighten lock nut. DC
power cable must be attached before charger unit is installed.
• Do not plug in power supply unit until DC connection and
charger are in place.
• After securing the charger, plug the power cable into a
properly grounded outlet.
The SBC800 has no power switch. When plugged in, the char-
ger is ready. The LEDs illuminate after batteries are inserted.
10
Power