Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Q U I C K S T A R T G U I D E
STEP 1: CUT OFF ALL SAFETY TIES FROM BOTTOM
•
Using scissors, cut off the two(2) white safety ties from the bottom of the
unit, making sure to remove all ties from the unit. Then discard the ties.
STEP 2: PLACE THE UNIT ON A HARD, FLAT SURFACE AND
ATTACH HEADSET
•
Place the unit on a stable, hard and fl at surface such as a tabletop, tile
fl oor, or desk.
•
Do not place the unit on a carpet, rug, towel, or other soft surface to avoid
overheating and damage.
•
Attach the airfl ow tube to the front of the unit by gently pushing the end
of the tube over the oxygen output nozzle (see Figure 4)
STEP 3: TURN ON BOTH THE POWER SUPPLY AND OXYGEN FLOW
•
Plug the AC adapter into the back of the unit (see Figure 5), and then plug
into a nearby electrical outlet.
•
Turn on the power supply using the switch on the back of the unit.
•
To turn on the fl ow of oxygen, press the "OXYGEN ON/OFF" button on the
LCD screen display panel or on the remote control.
•
Both the power supply of the unit, AND the "OXYGEN ON/OFF" setting
must be turned on for the oxygen fl ow to start.
Page
BEFORE USING THE OXYGEN BAR FOR
THE FIRST TIME, FOLLOW THESE 3 STEPS:
Publicidad
Tabla de contenido
