Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
•
Please read the instruction manual
carefully and keep it for future use.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic
precautions should always be followed
to reduce the risk of fire, electrical shock,
burns and other injury, including the
following:
1. Study this instruction manual carefully
before using the product.
2. The device is only intended for private and
not for any commercial use.
3. Remove the unit from its packaging and
check to make sure it is in good condition
before using.
4. Do not let children play with parts of the
packing (such as plastic bags).
5. Check the household voltage to ensure it
matches the fan's rated specification.
6. Check the power cord and plug carefully
before use to make sure that they are not
damaged.
7. Before unplugging the power cord, be sure
to turn off the power. When touching the
unit, be sure your hands are dry to prevent
from electric shock.
8. Do not run the cord under carpeting. Do
not cover cord with throw rugs,runners or
the like. Arrange cord away from traffic
area and where it will not be tripped over.
9. Do not use a soft surface, like a bed,
where openings may become blocked.
10. Avoid the use of an extension cord
because the extension cord may overheat
and cause a risk of fire.
11. Do not use outdoors.
12. Avoid contact with moving parts. Keep
hands, hair, clothing, spatulas and other
utensils away during operation to reduce
the risk of injury to persons and/or damage
to the machine.
13. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
14. Children should be supervised to ensure
that they do not play with the appliance.
CAUTIONS
•
This appliance is not a toy.
•
To avoid the risk of fire or electric shock do
not remove the housing by yourself.
•
Any servicing other than cleaning and user
maintenance should be performed by an
authorized service representative.
•
If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
•
Repair should be done by an authorized
service personal only.
•
To reduce the risk of electric shock, do not
immerse or expose the product, flexible
cord or plug to rain, moisture or any liquid.
•
Do not operate the appliance with wet
hands, in order to avoid damage.
•
Do not use the appliance near explosive
and combustible gas.
•
Do no turnover the appliance. Unplug the
power supply If it is toppled over and there
have some water in the body. Dry the body
before use.
•
Do not knock or shake the body when use,
otherwise it may cause stop.
•
The appliance must not located
immediately below a socket outlet.
•
The rating current of socket should exceed
10A.
•
Do not use the appliance in the immediate
surrounding of a bath, a show or a
swimming pool.
•
Don't keep the device in the watery
environment;
•
Keep the device away the place of high
temperature, ray and wetly.
•
Please turn off the power supply in the
watery environment.
•
In the event where the appliance is
dropped into the water, turn off the power
at the power outlet and remove the plug
immediately. DO NOT REACH INTO THE
WATER TO RETRIEVE IT.
•
It is important to note that the appliance
will have to be inspected by a qualified
technician before using it again.
2
FUNCTIONS & OPERATION
Plug in first
Push the ON/OFF button to start and stop the
fan.
•
SPEED button: Push to select speed of:
Low- Middle – High
•
TIMER button: Push it to select the timers
from 0.5 hours to 7.5 hours.
•
MODE button: Push the button to select
mode of "Normal", "Nature", "Sleep"
•
SWING button: Push the button to oscillate
the fan, push it again to stop the function.
All the buttons are on the control panel: (fig. A)
REMOTE CONTROL
•
To use the remote control, first remove the
plastic spacer between the battery and the
terminal.
•
Ensure that there are no objects between
the remote control and the heater.
•
If the remote control still exhibits problems,
minimise any ambient light sources that
may interfere with the operation of the
Infrared signal.
•
If the remote control stops working properly,
replace the battery with a similar "CR2025"
button cell, ensuring that the polarity is
correct
Push the button
to start the fan
Push the button
to select fan speed of Low-
Middle –High
Push the button
to select mode of
"Normal","Nature","Sleep"
Push the button
to oscillate the fan, push it
again to stop the function
Push the button
to select the timers from
0.5 hours to 7.5 hours.
ASSEMBLING
(fig. B)
Step 1: Aiming the assemble poles with the
corresponding holes, and insert the poles into
the holes.
Step 2: Aiming the assembled base to screw
poles of the fan body
Step 3: After well connect of the body and
base, screw into the screw holes of the base.
And put the power cord into the slot of the
base.
Step 4: Put the fan flatly
THE USAGE OF FRAGRANCE BOX
In the front of the fan, there is a small box
below the vent. There is a sponge inside the
fragrance box. Take out the box and put some
fragrance on the sponge if you would like the
wind blow with fragrance.
CLEANING AND MAINTENANCE
Clean with neutral detergent and soft cloth.
Attention: unplug the power plug when clean
the appliance ,since there have high pressure
in the body. Do not leave any water on the
control panel.
Do mot use benzine, thinner or other solvents.
If there is something wrong with the
equipment, do not use it any more and wend
for the technical personnel for repairing.
ACCESSORY
Screws for assemble the base; Remote control
TECHNICAL CHARACTERISTICS
220-240V • 50Hz • 60W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local
regulations: hand in the non-working
electrical equipments to an appropriate waste
disposal center.
3
Publicidad
Tabla de contenido
