Setting Damping; Storing The Scale - Seca 675 Manual Del Usuario

Setting damping

Damping is useful for reducing weight determination malfunctions (due to patient move-
ments, for example). The stronger the damping, the more slowly the weight display re-
acts. You can set damping to suit requirements.
– Press the FUNC key and keep it de-
pressed for 2 seconds.
FIL and the current setting appear in
the display:
0 = slight damping
fast determination of weight
1 = average damping
normal determination of weight
2 = strong damping
slow determination of weight
– Press an arrow key if you want to
change the set value.
– Press the FUNC key again to store the
displayed value. The scale is then back
in normal weighing mode.
The settings are retained even once
the scale is switched off.

6. Storing the scale

The scale can be stored upright to save space. Secure the scale so that it does not fall
over when stored in the upright position.
– Remove the mains unit plug from the
mains socket.
– Remove the mains unit plug from the
connecting socket on the scale.
– Press the locking mechanism on the
Western plug and remove the plug from
the socket on the electronics box.
– Carefully pick up the scale by the handle
and move it using the castors on the
other side of the scale.
26