Package Contents; Product Specifications - PROZIS Fluxr Manual Del Usuario

EN
User manual

PACKAGE CONTENTS

• 1 × Prozis Fluxr USB Charger
• 1 × Quick guide

PRODUCT SPECIFICATIONS

• 18W 2-port Type-C PD & QC3.0 charger
• USB-C PD 3.0 Output: 5V/2.5A; 9V/2A; 12V/1.5A
3.QC3.0 Output: 5V/3A; 9V/2A; 12V/1.5A
• Full-speed charging of 2 devices at the same time
• Efficient synchronous rectification scheme, up to
87% of the conversion rate
• Sleek, durable and heat-eliminable
• Overload, overvoltage, overcurrent and short-circuit
protection
• Guaranteed Safety: Premium materials and built-in
fail-safes keep your device and yourself protected
against short circuits.
PRODUCT OVERVIEW (SEE PAGE 2)
1. QC 3.0 Charging Port: 5V ⎓ 3A; 9V ⎓ 2A; 12V ⎓
1.5A
2. USB-C PD Output: 5V ⎓ 2.5A; 9V ⎓ 2A; 12V ⎓
1.5A
3. Wall Socket Connector
8
INSTRUCTIONS (SEE PAGE 2)
Connect the Wall Socket Connector (3) to a 100-240 V
AC outlet for the PD and the QC3.0 ports to become
operational. Connect the device to be charged to the
proper charging ports using the proper cables.
When not charging any devices, the charger's internal
consumption is inferior to 300 mW.
Note:
This charger is suitable for use with a 100-240 V con-
stant alternating current. A higher or lower voltage than
the range specified is unsuitable.
Note regarding short-circuit protection:
If any short-circuit occurs that activates the device's
short-circuit protection, the charger will stop charging in
order to protect any devices being charged.
Maintenance and cleaning
Always make sure the device is completely disconnect-
ed and switched off before cleaning.
Do not use abrasive, acid or solvent cleaning agents to
clean the device, to avoid damaging it.
Only clean the outside of the device. using a soft, dry
cloth.
In case of hard-to-remove dirt, a slightly moistened
cloth and a mild cleaning agent may be used.
EN
9