Programmed Playback 1 - Teac SL-D96 Manual Del Usuario

1
2
3
28

Programmed Playback 1

Up to 20 tracks can be programmed in the
desired order.
< Shuffle playback does not work during program
playback.
< Insert a disc and select "CD" before beginning
programming.
1 Press the MEMORY/CLOCK ADJ button in the
stop mode.
"MEMORY" indicator blinks, and "P-01" appears
on the display.
2 Within 10 seconds, press the numeric buttons
to select a track.
The track is programmed, and "P-02" is displayed.
Example:
To select No.2:
To select No.12:
< If the numeric buttons aren't pressed within 10
seconds, program mode will be canceled.
< You can also use the front panel buttons to select a
track number. In this case, press the SKIP button to
select a track number and then press the
MEMORY/CLOCK ADJUST button while "MEMORY"
is blinking on the display.
2
Repeat step to program more tracks.
< You can program up to 20 tracks.
< To cancel the program mode, press the STOP
button (H).
3 When the selection of track numbers is
completed, press the PLAY/PAUSE button
(y/J) to start program playback.
If the PLAY/PAUSE button isn't pressed within 10
seconds, the MEMORY indicator will go off. In that
case, press the MEMORY/CLOCK ADJ button and
then press the PLAY/PAUSE button to start program
playback.
The programmed contents are kept in memory
even after the AUX, TUNER button is pressed or the
power is turned off.
ENGLISH