Cleaning And Maintenance; Technical Specifications - Perel Tools EFANT75 Manual De Usuario

3. Description
1. Grille
2. Cover
3. Controls
4. Oscillation button
5. Timer
6. Power cord
7. Screw
8. Base
4. Assembly
1. Assemble the base by matching and sliding the two
pieces together.
2. Pass the power cord (6) through the hole (A) of the base
(B).
3. Insert the cover (2) into the base (B) and fix with the
screws (7).
4. Pass the power cord (6) through the channel in the base
(B).
5. Operating Instructions
• Insert the power plug (6) into the mains.
• The fan features controls (3, 4 and 5) which are placed on top of the fan: 0 = STOP, 1 = LOW, 2 = MEDIUM, 3 =
HIGH. Turn the oscillation on or off with the oscillation button (4). Set the timer using the timer button (5). The fan
will automatically switch off when the selected time has elapsed. When not using the timer set the timer button (5)
to ON.
If the timer button (5) is set to OFF, the fan will not operate.

6. Cleaning and Maintenance

1. Disconnect the device from the mains prior to maintenance activities.
2. Remove accumulated dust using a soft cloth or vacuum cleaner. Interior dust can be removed using a vacuum
cleaner in its blowing mode.
3. Wipe the exterior of the fan using a moist, lint-free cloth and a mild soap solution. Dry thoroughly before use.
Do not allow water to run into the fan as this could create fire or electric shock hazard. The fan motor is lubricated for
life and will require no further lubrication. No other user maintenance is required. If service is required, send the fan
to the nearest authorized dealer. Store the fan in a dry place when not in use.

7. Technical Specifications

Power Supply
Consumption
Timer
Oscillation Arc
Box Dimensions
Weight
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
EFANT75
max. 230VAC / 50Hz
50W
20, 40, 60, 80, 100 & 120 min
75°
778 x 239 x 176mm
3.8kg
45°C
4 PEREL