Publicidad
Enlaces rápidos
Important:
1. Check the Rhino-Rack website to ensure you have the latest issue of these instructions.
2. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
3. Check the contents of kit before commencing fitment and report any discrepancies.
4. Place these instructions in the vehicle's glove box after installation is complete.
5. These instructions must be followed for warranty to be upheld.
Fit Time: 1.5 hours
Rhino-Rack
22 Hanson Pl, Eastern Creek
NSW 2766, Australia
(02) 8846 1900
rhinorack.com
GEN 4 GMC SIERRA/
GEN 4 CHEVROLET SILVERADO/
GEN 5 RAM CREW CAB - RR5B1
Document No: R2509
Issue No: 03
Issue Date: 03/02/2021
Page 1 of 5
Publicidad
Manuales relacionados para Rhino-Rack RR5B1
Resumen de contenidos para Rhino-Rack RR5B1
- Página 1 GEN 5 RAM CREW CAB - RR5B1 Important: 1. Check the Rhino-Rack website to ensure you have the latest issue of these instructions. 2. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations.
- Página 2 It is your responsibility to ensure these fitting instructions are given to the end user or client. These instructions remain the property of Rhino-Rack Australia Pty. Ltd. and may not be used or changed for any other purpose than intended.
-
Página 3: Capacidad De Carga
RR5B1 Instructions Capacidad de Carga Capacidad máxima de carga para el Sistema = xx kg /xxx lbs (incluye el Sistema de peso). Revise el manual del propietario de su vehículo para la capacidad máxima de carga. Por favor asegúrese de solo usar la cantidad máxima de carga para el techo permitida por el manufacturero, si es menor que lo enlistado en la siguiente tabla. -
Página 4: Parts List
RR5B1 Instructions Parts List Tools Required: Item Description T1 - Power drill RAM 19 Backbone RH T2 - 3mm drill bit T3 - 5mm drill bit RAM 19 Backbone LH T4 - Hammer M6 x 20mm Socket Head Cap Screw... - Página 5 RR5B1 Instructions For Gen5 RAM x = 6 11/16” (170mm) x = 7 11/16” (195mm) For Gen4 Silverado/ Gen4 Sierra Door jamb. Rear Front Page 5 of 9...
- Página 6 RR5B1 Instructions Side view: Note: Hardened steel roof. Be sure to allow the drill bit to cool down between holes drilled. Between drilling 5min - Entre la perforación Top view: Drill stop depth: 3mm (1/8”). 3mm (1/8”) 3mm (1/8”) (T2 3mm Drill Bit.) Note: Hardened steel roof.
- Página 7 RR5B1 Instructions Page 7 of 9...
- Página 8 It is your responsibility to ensure these fitting instructions are given to the end user or client. These instructions remain the property of Rhino-Rack Australia Pty. Ltd. and may not be used or changed for any other purpose than intended.
- Página 9 RR5B1 Instructions 15-20NM (T10) 11-14LB/FT For 42XXX Series Pioneer Pioneer Platform / Pioneer Tray / Pioneer Tradie Example Fitting Chart - TOYOTA FJ Cruiser 4dr 4WD PIONEER 41107 (2128 x 1236mm) (6’ 11 25/32” x 4’ 21/32”) PIONEER 42107B (2128 x 1236mm) (6’...