Functional Description; Overview; Technical Data; Safety Instructions - Deltafox DG-CLB 1821 Traducción Del Manual De Instrucciones Original

GB

Functional description

The cordless leaf blower operates via the
use of a fan. Foliage can quickly be gath-
ered or blown out of hard to reach areas.
The following describes the functions of
the operating parts.

Overview

1 Blower pipe
2 Connector nozzle
3 Locking button
4 Motor housing
5 On/Off switch
6 Handle
7 Battery
8 Battery charger
9 Release buttons
10 Button for battery level indicator
11 Battery level indicator

Technical data

Cordless
leaf blower ..........................DG-CLB 1821
........................................... DG-CLB 1821 Set
Motor voltage ................................. 18 V
Idling speed .........max. 12 000 min
Air speed ........................... max. 208 km/h
Weight
(without battery and charger).......... 1.2 kg
Sound pressure level
(L ) ....................... 82.6 dB(A), K
pA
Sound power level (L
guaranteed ............................... 92 dB(A)
measured ........90.4 dB(A), K
Vibration (a ) ......... < 1.66 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
50
(rpm)
-1
= 3 dB
pA
)
WA
= 2.03 dB
WA
, K = 1.5 m/s
2
Technical and optical changes may be under-
taken in the course of further development
without notice. All dimensions, references
and information in this instruction manual are
therefore not guaranteed. Legal claims made
on the basis of the instruction manual can
therefore not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the blower.

Symbols and icons

2
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.