Volume Adjustment; Technical Specifications - Trevi RC 827 D Manual Del Usuario

RC 827D
RC 827 D
COMMAND
1. Power-Standby / Alarm Power Off Key
2. PRESET / MEMORY + button
3. TUN + / MINUTE button, search for radio stations / minute setting
4. VOL + / Alarm button, volume control / alarm activation
5. SNOOZE button
6. Battery compartment
7. Display
8. ZZZ, SLEEP function indication active
9. TUN- / HOUR button searches for radio stations / settings now
10. SLEEP button
11. TIME SET button
12. Active alarm indication (Radio / Buzzer)
13. Speaker
14. VOL button -, volume adjustment
INSTALLATION
Insert the plug of the power cable into a power outlet 230V
To keep the clock and the time memorization running even during a momentary
power failure, insert two AAA batteries (not supplied) into the appropriate
compartment (6) on the bottom of the appliance, following the polarity
indications printed on the mobile.
CLOCK ADJUSTMENT
1. In Standby mode, long press the TIME key (11), the date / time adjustment
function will be activated (the display will flash).
2. Using the Hour (9) and Min (3) keys, adjust the current time and minutes
respectively
3. Confirm with the TIME key (11).
Note: if during the adjustment phase (display flashing) no key is pressed for a
certain time, the alarm clock automatically returns to standby (fixed display).
RADIO
1. Turn on the radio by pressing the Power / Standby button (1); press it
again to turn it off.
2. Tune into your favorite station by selecting the right frequency with the
TUN + (3) and TUN- (9) buttons. During the operation, the tuned frequency
is shown on the display.
3. Pressing the TUN + and TUN- long keys activates the automatic search,
the radio scans the frequency until it stops at the first radio station found.
FM ALARM CLOCK
FM ALARM CLOCK
- 50Hz.
Listening stored radio stations and storing a radio station
Up to 10 FM band stations can be stored:
1. Select the desired frequency.
2. To save a radio station in memory:
- press the M + key (2) for a long time until the display flashes.
- use the VOL + (4) and VOL- (14) keys to select the memory location.
- press the M + key (2) again to confirm the memorization. The radio is
now saved.
3. To listen to a radio station saved in memory, press the M + key (2) until
the desired memory number is displayed.

VOLUME ADJUSTMENT

While listening to the radio, press the VOL + (4) and VOL- (14) buttons to
adjust the listening volume.
WAKE UP
1. In Standby mode, long press the ALARM key (4), the date / time adjustment
function will activate (the display will flash).
2. Using the Hour (9) and Min (3) keys, adjust the time and minutes to
activate the alarm clock, respectively.
3. Confirm with the ALARM key (4), the display will stop flashing and will
return to show the current time.
4. Press the ALARM key several times to activate the buzzer alarm in sequence
(the buzzer alarm indication lights up), the alarm with radio signal (the radio
alarm indication lights up) or deactivate both alarms ( alarm indication off).
The volume and the station played by the radio alarm will be the one set
during the last listening to it.
TURNING OFF THE ALARM
If you wish to switch the alarm off temporarily, press the SNOOZE button (5);
the interruption lasts 9 minutes, after which the alarm is switched on again.
The operation can be repeated several times within an hour.
To extinguish the alarm-alarm permanently, press the ALARM OFF button (1).
The alarm is still active to repeat itself 24 hours later.
To deactivate it, press the ALARM button (4) until the alarm indication
(12) goes out.
SLEEP FUNCTION
The SLEEP button (10) allows you to program the automatic turning off of
the radio up to a maximum of 90 minutes.
Set the switch-off time by pressing the SLEEP button (10) several times;
initially the maximum time of 90 minutes will be shown, by pressing the
SLEEP key several times, this time will be lowered in 10 minute steps until
the word OFF appears (SLEEP function deactivated).
When the SLEEP function is activated, the indication ZZZ (8) is activated
on the display.

TECHNICAL SPECIFICATIONS

Power supply: ........................................................................ 230V 50Hz
Buffer batteries (not supplied): ............................... 2 "AAA" 1.5V batteries
FM frequency range: .......................................................... 87.5-108MHz
Consumption: ....................................................................................5W
Dimension: ................................................................... 140*114*44 mm
Weight: ..... ................................................................................. 310 gr
ENGLISH
5