Bikini Zone - Silvercrest SWWS 240 C Instrucciones De Uso

10) Grip the wax strip at the lower end and pull it off upwards with
a rapid movement against the direction of hair growth.
11) When you are finished with the treatment, pull the plug from
the mains power socket to turn off the appliance. The control
lamp 2 goes out.

Bikini zone

Once the wax disc 9 is completely melted:
1) Open the lid 7 by turning it anticlockwise slightly and lifting it
upwards.
2) Pick up a little wax using the flattened edge of the spatula 8.
You can wipe off excess wax on the rim of the appliance.
3) After application, you can place the spatula 8 into the tray 6
on the edge of the appliance so that the spatula 8 projects over
the inner bowl 1.
NOTE
► When epilating the bikini zone, treat only small areas at
once. The skin is very sensitive.
4) Tighten the skin with one hand and apply the wax in the direc-
tion of hair growth (towards your inner thigh).
5) Wait about 30 - 60 seconds until the wax is dry.
6) Grip the wax strip by the thicker end (the end nearer to your
inner thigh) and pull it off downwards with a rapid movement
against the direction of hair growth.
Repeat the process for the remaining areas of skin.
7) When you are finished with the treatment, pull the plug from
the mains power socket to turn off the appliance. The control
lamp 2 goes out.
│ GB │ IE
■ 14
SWWS 240 C1