EN-2
Auto Shut-Off: To extend battery life, the scale will automatically turn off after
•
approximately (4) minutes if no active weighing is occurring. This feature is
active with battery operation only.
2. INSTALLATION
2.1 Power
Power the scale using the AC power adapter (not included) or 3 AA batteries.
Battery Installation
Remove the battery cover on the bottom of the scale and place the 3 "AA" size
batteries into the compartment as indicated. Do not use excessive force or press the
weighing pan. Re insert the battery cover.
AC Power Connection
Connect the AC adapter (not included) to the receptacle at the rear of the scale.
Plug the AC adapter into a properly grounded electrical outlet.
2.2 Load cell Lock
Slide the load cell lock to the unlock position
or transport.
The scale base allows for the efficient stacking of one scale on top of another.
Note: do not stack more that 4 scales on top of each other.
6
2014_391_10889_3_Compact Series.indb 6
for use. Lock for storage, stacking,
www.eu.fishersci.com/fisherbrand
CL Series Scales
21/01/2015 15:57:33