Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
ARM
ASSEMBLY
1
3
#6 BOLT M6*30
Step 1:
Insert the right and the left arms (#1 and #2) into the cross
brace (#3) on both sides. Fasten them together by using
bolts (#6), washers (#10), and plastic nuts (#11). Keep the
bolts loose. See Figure 2.
Note:
The labels marked "L" and "R" on arms (#1 and #2)
should coincide with Figure 2 to ensure proper assembly.
FIGURE 4
1
2
4
Step 3:
Fasten the swing bars of the arm assembly to the bottom
frame (#4) by using bolts (#9), washers (#10), and plastic
nuts (#11). Keep the bolts loose. See Figure 4.
V-3
R
1
2
3
2
11
10
6
30
11
10
10
10
10
11
10
10
10
10
55
#9 BOLT M6*55
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
L
FRONT
HIGHER
TUBE
Step 2:
Place the arm assembly on to the bottom frame (#4). Make
sure that the higher tube on the bottom frame (#4) is facing
towards the front of the glider. See Figure 3.
FIGURE 5
9
9
Step 4:
Place the right arm (#1) onto a non-abrasive surface, such
as a carpet. At the front of the glider, fasten the seat
assembly (#5) to arms (#1 and #2) by using bolts (#8).
Keep the bolts loose. See Figure 5.
PAGE 2 OF 3
4
2
5
8
1
8
15
#8 BOLT M6*15
Publicidad
