Instruction Manual; Flat Belt Cutter - Baudat HCP50 Manual De Instrucciones

EN
Use
• Release hand lever 1 by opening strap
and hand lever 1 completely until the pivoted
blade 3 is open.
• Insert the flat belt and turn the strap 2 in
position b. Do not cut angularly!
• Squeeze the handles 1 to manually operate the
pivoted blade 3 during the cutting process.
• Releasing the pivoted blade 3 is possible
during
Open strap 2 and handle 1 completey. The
pivoted plate 3 turns back in to basic position.
• Lock lever 1 by turning the strap 2 in position a
during squeezing both handles.
Maintenance
• Oil movable parts.
• Brush ratchet teeth.
The tool is only for use in applications
purposes
instructions.
Using this tool for tasks other than those
described may lead to accidents or the
destruction of the tool.
The tool must only be repaired by an electro-
mechanical specialist or by the manufacturer.
For works of external staff we assume no liability.
Use only original BAUDAT spare parts! If not,
claims of the warranty declaration expires.
15-259_HCP50.indd 5

Instruction manual

Flat belt cutter HCP50
For polymer flat belts up to max. 3
mm height and 50 mm width.
Do not live working!
Switch off current!
No extremities near the blades!
cutting proceeding
described
as
in the
5
2
follows:
operating
3/21/2011 9:56:48 AM