Making The Electrical Connections - HAMPTON BAY DSHD19522V1 Guía De Uso Y Mantenimiento

Installation (continued)
3

Making the electrical connections

* Use wire connectors (CC) (supplied) to connect the wires.
□
Ground Wire:
1. Wrap the supply ground wire around the green ground screw on the crossbar (AA), no less than 2 in. from the end of the wire.
Tighten the ground screw.
2. Connect the fixture ground wire to the supply ground wire with a wire connector (CC).
□
Supply Wire:
1. Connect the supply white wire to the white fixture supply wire with a wire connector (CC).
2. Connect the supply black (or red) wire to the black fixture supply wire with a wire connector (CC).
3. Wrap each connection with approved electrical tape and carefully stuff all of the connected wires into the outlet box.
AA
4
Installing the fixture body to outlet box
□
Re-attach the backplate on the fixture body (A) to the
crossbar assembly (AA).
□
Secure with the previously removed mounting balls.
CC
Green ground screw
AA
A
Mounting balls
5
Installing the light bulb and the cage
□
Remove lock balls from the cage (B).
□
Install correct bulb referring to fixture markings and/or labels for
maximum wattage.
□
Attach the cage (B) to the cap on the fixture body (A).
□
Secure with the previously removed lock balls.
NOTE: Use (3) 60W maximum medium base (E26) type "S"
or 8W maximum medium base (E26) self-ballasted LED
vintage Edison bulbs (sold separately).
6
A
Lock balls
B