Bluetooth Operation - Lenco Classic Phono TCD-2600 Manual De Usuario

Idiomas disponibles

NOTES:

Certain types of records may have an auto-stop area outside the preset limit, so the turntable may stop

before the last track finishes. If this occurs, set the AUTO-STOP SWITCH (28) to the "OFF" position. This

allows the record to play to the end, but please note that it will not stop automatically. You must

manually raise the TONE ARM (29) and place it back in the TONE ARM REST (31) and then turn off the

power to stop the turntable from spinning.

1. Rotate the FUNCTION SELECTOR (2) to select to the TAPE/LINE position.

2. Select Cassette function by pressing BLUETOOTH/CASSETTE FUNCTION SELECTOR BUTTON (35) to

TAPE position.

3. Rotate the POWER/VOLUME ON/OFF SWITCH (5) to turn on the unit.

4. Fully insert the cassette tape into CASSETTE SLOT (23), Playback will

begin automatically.

5. Adjust the volume to the desired level.

6. Press EJECT/FAST FORWARD BUTTON (22) halfway to engage Fast

Forward, press again to disengage and resume playback.

7. Press EJECT (22) fully to eject the cassette

PLAY

1. Rotate the FUNCTION SELECTOR (2) to select to the TAPE/LINE position.

2. Select Bluetooth function by pressing BLUETOOTH/CASSETTE FUNCTION SELECTOR BUTTON (35) to

BT position. The blue LED light(at the bottom of the dial scale) will begin to flash

3. Turn your external device's Bluetooth Setting ON. Wait a moment, then look for the Bluetooth

pairing name "TCD-2600".

CASSETTE OPERATION

FAST FORWARD

BLUETOOTH OPERATION

EJECT

Tabla de Contenido