Ordering Spare Parts; Ec Declaration Of Conformity - Euromate Dust Free Industrial 8500 Instrucciones Para El Uso

10 TROUBLESHOOTING
If the machine does not work or does not work correctly, consult the
following checklist to see if you can solve the problem yourself. If not, seek
the assistance of qualified personnel.
WARNING
Always check first whether the fault is mechanical or electrical.
Work on and repairs to the electrical system may only be carried
out by trained, authorised service technicians.
Always turn the machine OFF (use the main switch, fig. 4) and disconnect the
power supply before carrying out any repairs. First read the repair
instructions at the beginning of this manual.
10.1 Malfunctions DUST FREE INDUSTRIAL 8500
Problem
Motor does not start
Motor hums, but does not run
Motor stops on its own
Insufficient extraction capacity

EC DECLARATION OF CONFORMITY

We of
Euromate BV, Minervum 7324, 4817 ZD, Breda, Nederland
hereby declare that:
Product Dust Free Industrial 8500
Article Number 3180430200
in accordance with the following Directive(s):
2012/19/EC
2011/65/EC
2004/108/EC
2009/125/EC
2006/95/EC
2014/53/EC
is in conformity with the applicable requirements of the following documents:
IEC60335-2-65:2002 + AMD1:2008 + AMD2:2015
Draft ETSI EN303446-1 V1.1.0 (2017-03)
EN300 330 V2.1.1
EN300 220-2 V3.1.1
EN ISO 5801:2008-10
Ecodesign for fans No. 327/2011
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications.
The unit complies with all applicable essential requirements of the Directives.
Signed:
Name: Gert Jan Kleinrensink
Position: Director
Place: Breda
Date: 29 November 2019
10
Possible cause
No mains voltage
Main switch defective
Fuse defective
PCB defective
Motor is stuck
Motor defective
Fan dirty
Filters dirty
Suction side air leak
The WEEE Directive
The RoHS Directive
The Electromagnetic Compatibility Directive
Energy related products
The Low Voltage Directive
RED Directive
RED Health & Safety
EMC
RED
RED
Industrial fans
11

ORDERING SPARE PARTS

Send your order to your supplier and always provide the following
information:
- product name, supply voltage and serial number
(see identification plate)
- item number of the part concerned
- part name
- quantity
Remedy
Check the mains voltage
Repair or replace the main switch (by Euromate)
Replace the fuse (by Euromate)
Replace the PCB (by Euromate)
Free/clean the motor (by Euromate)
Repair or replace the motor (by Euromate)
Clean the fan (by Euromate)
Replace the filters. See chapter 8.2.
Check or replace the sealing material.
Document reference:
1180461100