Cleaning And Maintenance; Technical Specifications - cecotec GrandSommelier 15000 Black Compressor Manual De Instrucciones

ENGLISH
Power/Temperature unit button
Short press this button to turn the device on or off.
Long press to switch the temperature unit between Fahrenheit and Celsius.
Temperature increasing/decreasing buttons
Automatic-locking function
The device will lock automatically after 20 seconds if the user does not press any button.
After locking it, the increase/decrease buttons cannot be used but the unlocking and power
button can operate normally.
Auto light off function
The lamp will automatically turn off after 10 minutes without operation.
Adjustable range
Minimum value: 5 ºC/41 ºF
Maximum value: 18 ºC/ 64 ºF
Display range
Control panel's temperature display range: 0~37 ºC/32~99 ºF
The temperature measured by the temperature sensor will be displayed ±1 ºC (if the user has
selected Celsius as the temperature unit) and ±2 ºF (if Fahrenheit) from the set temperature.
Error code
EE: "EE" will be displayed when the temperature sensor short-circuits or it is disconnected. It
will flash and the refrigeration will stop.
LL: When the temperature sensor measures a temperature lower than 0 ºC, "LL" will be
displayed flashing and the cooling will stop.
HH: When the temperature sensor measures a temperature higher than 37 ºC, "HH" will be
displayed flashing and the cooling will stop.

5. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the device's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive cleaners or scouring pads to clean the product.
30
6. TROUBLESHOOTING
Problem Possible cause
The device does not work. Check if it is plugged in.
The circuit breaker tripped or a fuse is blown.
Turns on and off frequently. The room temperature is too hot.
The device is too full.
The door is opened too often.
The door is not totally closed.
The temperature control is not set correctly.
The door's gasket does not seal properly.
The device is too close to the wall or other objects.
The device vibrates. The device is not set on a stable surface.
The device makes too much noise. The rattling noise may be caused by the
refrigerant's flow, which is perfectly normal.
As each cycle ends, you may hear a gurgling sound
caused by the flowing of the refrigerant liquid in
your device.
The device is not set on a stable surface.
The inside walls may contract and expand, and this
may produce a cracking noise.
The door does not close properly. The device is not set on a stable surface.
Dust tank is not installed correctly.
The door's gasket is dirty or bent.
The shelves, bins or baskets are out of position.
There are water droplets or a layer Turn the device off for 30-40 minutes and pour out
of ice. the water inside it.

7. TECHNICAL SPECIFICATIONS

Product:
GrandSommelier 15000 Black Compressor
GrandSommelier 20000 Black Compressor
GrandSommelier 24000 Black Compressor
GrandSommelier 15000 Inox Compressor
GrandSommelier 20000 Inox Compressor
GrandSommelier 24000 Inox Compressor
ENGLISH
31