Maintenance And Cleaning - Mestra 100195 Manual Original

PRECAUTIONS
 Before connecting the appliance, make sure that it is a
220-230 V, 50/60 Hz socket with earth connection. It
is also necessary that it is adequately protected with a
thermal switch. Consult your installer.
 Do not allow children or unqualified personnel to han-
dle or come near the appliance when it is operating.
 Place the appliance on a rigid and flat surface so that
there is no risk of tipping over.
 Make sure the vent windows are clear. The nearest
wall or object must be at least 15 cm away.
 Disconnect the appliance from the mains before clean-
ing.
 Unplug the device from the electrical outlet when not
in use.
 Do not operate the device if the power cord or steam
hose is damaged. Call your authorized dealer for re-
placement of any damaged parts.
 The upper part of the appliance can become very hot
during use.
 The temperatures of the metal part of the steam gun
will be quite high, avoid any contact.
 The device has the ability to generate high-tempera-
ture continuous steam of large volumes. Avoid close
contact with the steam and do not point the steam di-
rectly at the face.
 Point the gun and therefore the steam jet only in the
direction of the job you are performing. Do not point
the gun in any other direction.
 Handle the appliance with great care. It can be dam-
aged due to a falling impact.
 Do not immerse the device in water or other liquids.
 Do not fill the boiler with any substance other than dis-
tilled water.
 Do not exceed the maximum water level.
 Before filling or emptying the water tank, unplug the
device from the power outlet and turn off the boiler
switch.
 For your safety, do not open the cap before the pres-
sure in the device drops to zero. To fill, follow the ins-
tructions in the instruction manual.
 Open the cap of the appliance carefully. The sudden
release of the water vapor accumulated in the tank
could cause burns.
 Do not overtighten the tank cap.
 If the cap is damaged, contact an authorized dealer and
replace it.
 Do not leave the device in operational status if the "No
Water " lamp is on during operation.
 Do not try to repair the appliance yourself. Do not dis-
assemble it. For repair, take your device only to au-
thorized dealers.
10

MAINTENANCE AND CLEANING

To ensure optimum reliability and a long life for the ap-
pliance, we recommend the following tips:
 It is necessary to periodically descale the appliance:
- Open the cap.
- Fill the water tank, shake and empty.
- Repeat the operation as many times as necessary.
- Refill the boiler with distilled water.
 It is advisable to wash the appliance tank once a
month, proceeding as follows:
- Disconnect the appliance from the mains.
- Open the cap of the appliance slowly so as to allow
any residual steam to escape.
- Put ½ liter of water in the tank using the funnel sup-
plied.
- Let the water act for a few minutes.
- Empty the water by overturning the container.
- Repeat the operation if necessary.
 Some calcium deposits may stick to the steam mani-
fold. Remove them by blowing compressed air to re-
lease the injector line.
 In the event of a fault or breakage of the appliance, do
not intervene directly: contact your MESTRA dealer
TECHNICAL CAHARACERISTICS
Height (without
support):
Height (stand folded):
Width:
Length:
Weight:
Feeding:
Consumption:
Capacity:
Pressure:
Ref. 100195 Ref. 100196
290 mm 280 mm
685 mm 680 mm
235 mm 400 mm
335 mm 325 mm
6.2 kg 11,3 kg
220-230 V, 50/60 Hz
1250 W 2250 W
3,5 L 5 L
4 bar 4 bar