Applying Grease - Texi ART AUTO Manual De Usuario

6. Applying grease

1. Turn the power switch to "OFF".
2. Remove the screws.
3. Apply grease to each of the holes until the grease over-
flows slightly.
4. Tighten the screws.
5. Turn the machine pulley by hand to move needle bar up
and down several times in order to disperse the grease.
6. Use a cloth to wipe away any excess grease.
7. Add grease after approx. 500 hours or when it is need-
ed.
35
EN TEXI ART AUTO operation manual