Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Hinge replacement
To replace the hinges, you must remove the doors ÿrst.
CAUTION
•
When removing the doors, take extreme caution because the doors are heavy.
•
Before replacing the hinges, put a soft pad such as cardboard on the oor to prevent
scratches on the door when you place the doors down.
•
As the hinges must be handled carefully and replaced by two or more persons, we
recommend you to call for professional technical service.
•
If you remove the hinge without holding the door, the door may fall and cause injury.
•
Ensure that the shaft is rmly tightened on the hinge.
•
Check that the hinge is rmly attached to the cabinet.
•
Make sure the wire connectors are connected properly.
•
Be careful not to damage the wires when fastening the top cover.
WARNING
•
Tilting/laying the refrigerator requires a minimum of 2 people.
•
Disconnect the power cord before reversing the doors.
Tools required (not provided)
Philips screwdriver
10 mm socket wrench
Flat-head screwdriver
8 mm socket wrench
English - 4
11 mm spanner
10 mm spanner
Publicidad
Tabla de contenido
