Descargar Imprimir esta página

Troubleshooting Guide - NuTone CPHT200WH Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

Symptom
1. No sound from either speaker.
2. Sound from only one speaker.
3. Low bass sound.
4. Amplifier shuts off as volume is increased.

TROUBLESHOOTING GUIDE

Possible Cause
1. Improper source selected at amplifier.
2. Mute button pressed.
3. Wrong speaker output selected A or B.
4. Amplifier shuts off because of short circuit.
1. There is missing connection.
2. Balance control on amplifier turned all the way to
left or right.
1. Wrong polarity on one speaker.
1. Amplifier is overloaded.
Possible Remedy
1. Select proper source.
2. Defeat Mute button.
3. Select proper position on A/B switch.
4. Check all wires and remove the short. Check
proper operation of Amplifier/Receiver.
1. Check all wires and make all connections.
2. Set the control to mid position.
1. Check polarity & rewire, if necessary.
1. Short circuit in wire.
Check all wires & remove short.
Product specifications subject to change without notice.
4820 Red Bank Road, Cincinnati, Ohio 45227
Printed in China, Rev. 08/07/06, Part No. 61807

Publicidad

loading

Este manual también es adecuado para:

Cpht200