impress IM-1005W Manual De Instrucciones página 4

ACCESSORIES
FITTING AND REMOVING NOZZLES
!
CAUTION
Before changing nozzles, always switch the vacuum
cleaner off first.
● When fitting nozzles, insert in the suction opening.
● To remove nozzles, pull out of the suction opening.
FLOOR NOZZLE ATTACHMENT
The floor nozzle attachment is suit-
able for both carpets and smooth
floors.
CREVICE ACCESSORY
!
CAUTION Risk of injury! Never
hold the crevice nozzle close to the
body or it may stick to the skin. If the
nozzle does get stuck, set the On/Off
switch to immediately.
The crevice accessory is designed for upholstery, cleaning
the interior of cars and for getting into all corners and
cracks that are inaccessible with the floor nozzle attach-
ment or without a nozzle.
PREPARING TO USE
THE APPLIANCE
!
CAUTION
Only switch the vacuum cleaner on once you have
checked that all parts are fully assembled and all filters
correctly inserted.
Under no circumstances should the appliance be used
on the following:
– liquids or wet materials (e. g. carpet shampoo when
wet)
– glowing ash, cigarette ends, matches etc.
– combustible or in flammable substances
– very fine dust (e. g. concrete dust) or toner
– hard, pointed objects such as large splinters of glass
1. Fit or remove the rod handle depend-
ing on whether you want to use the
vacuum cleaner as a handheld or a
floor appliance.
2. You can use the vacuum cleaner
either without a nozzle or fit one of the
nozzles to the suction opening.
3 - English
3. To quickly unwind the cable from the
floor vacuum cleaner, twist down the
cord holder on the top handle.
4. Insert the power plug in a wall out-
let.
5. Set the On/Off switch to
6. Move the suction opening or nozzle over the surface to
be cleaned.
7. After finishing vacuuming, set the On/Off switch to
and unplug.
8. After use, always empty the dust cup and clean the
dust filter.
CLEANING
!
CAUTION
Remove the power plug before cleaning and / or putting
away.
Do not use caustic or abrasive products to clean the
housing or you may damage the surface.
Never immerse the appliance in water
Emptying dust cup and clEaning dust filtEr.
1. Hold down the unlocking button for
the dust cup and carefully remove.
2. Hold the dust cup over a dust- bin,
carefully remove the dust filter and
empty the dust cup.
3. Tap the dust filter gently.
4. Occasionally wash the dust filter
under cold running water.
!
CAUTION: Do not wash the dust filter in the washing
machine.
5. Leave the dust filter to dry in the air for 24 hours until
completely dry before reinserting.
!
CAUTION: Never use a hair dryer.
6. Press the dust filter firmly back into
the dust cup so it fits closely all round
the wall of the dust cup housing.
!
CAUTION: Never use the vacuum cleaner without the
dust filter inserted.
i
(on).
O