Installation Instructions - Allen + Roth 21-K151HCORB-AR Manual De Instrucciones

INSTALLATION INSTRUCTIONS

1. Shut off the water at the supply valves under the sink or at the
main water supply. Disconnect the supply lines. Remove the
existing faucet from the sink.
Clean and dry the surface area where the new faucet will
be mounted.
2. To install with the optional deckplate for a 3-hole sink, skip to
Step 3.
Insert the integrated water supply lines (2.1) and shank (2.2) on
the faucet body (A) through the mounting hole in the sink (2.3).
Skip to Step 4.
OPTIONAL DECKPLATE INSTALLATION:
3.
Apply a thin bead of silicone to the underside of the gasket (C).
Place the gasket (C) and deckplate (B) over the mounting
holes in the sink, aligning the center hole in the gasket (C) and
deckplate (B) with the center mounting hole in the sink (3.1).
Insert the integrated water supply lines (3.2) and shank (3.3) on
the faucet body (A) through the hole in the deckplate (B), gasket
(C) and the mounting hole in the sink (3.1) until the faucet sits
on top of the deckplate (B).
4
1
2
2.2
2.1
3
3.3
3.2
B
C
3.1
A
2.3
A